User manual

Current 16-Bit
Controller
Family
PAGE 10
dsPIC33F Motor Control Family: 40 MIPS, VDD = 3.0V-3.6V, Self-Write Flash, IntOSC = 8 MHz or 32 kHz, JTAG/DMA and nanoWatt Technology (continued)
dsPIC33FJ128MC706 128 16 53 64PT
2 A/D, 16 ch,
8 S/H max.
9 8 8 8 ✓ 2 2 2 1 — — Advanced
dsPIC33FJ128MC708 128 16 69 80PT
2 A/D, 18 ch,
8 S/H max.
98 8 8✓ 222 1 — — Advanced
dsPIC33FJ128MC710 128 16 85
100PT,
100PF
2 A/D, 24 ch,
8 S/H max.
9 8 8 8 ✓ 2 2 2 2 — — Advanced
dsPIC33FJ256MC510 256 16 85
100PT,
100PF
1 A/D, 16 ch,
4 S/H max.
98 8 8✓ 222 1 — — Advanced
dsPIC33FJ256MC710 256 30 85
100PT,
100PF
2 A/D, 24 ch,
8 S/H max.
9 8 8 8 ✓ 2 2 2 2 — — Advanced
PIC24 16-Bit Microcontroller (MCU) Family
Product
Program
Memory
(Kbytes)
RAM
(Kbytes)
I/O
Pins
Packages ADC
Analog
Comp.
Timers
16-Bit
Input
Cap
Output
Comp/PWM
RTCC
UART
w/IrDA
®
SPI
I
2
C™
ECAN™
Technology
PMP PPS
CodeGuard™
Security
Other Features
PIC24FJ Family: 16 MIPS, VDD = 2.0V-3.6V, Self-Write Flash, IntOSC = 8 MHz or 32 kHz and nanoWatt Technology
PIC24FJ64GA006 64 8 53 64PT
16x10-bit
500 ksps
255 5 ✓ 222 —✓ —BasicJTAG
PIC24FJ64GA008 64 8 69 80PT
16x10-bit
500 ksps
2 5 5 5 ✓ 2 2 2 — ✓ — Basic JTAG
PIC24FJ64GA010 64 8 85
100PT,
100PF
16x10-bit
500 ksps
255 5 ✓ 222 —✓ —BasicJTAG
PIC24FJ96GA006 96 8 53 64PT
16x10-bit
500 ksps
2 5 5 5 ✓ 2 2 2 — ✓ — Basic JTAG
PIC24FJ96GA008 96 8 69 80PT
16x10-bit
500 ksps
255 5 ✓ 222 —✓ —BasicJTAG
NOTE: PIC24H devices with 2 A/D converters can achieve 2.2 Msps conversion rate.
*Contact Microchip Technology for availability date.
Abbreviations are found on the last page of the Selector Guide.
dsPIC
®
Digital Signal Controller (DSC) Family (continued)
Product
Program
Memory
(Kbytes)
RAM
(Kbytes)
I/O
Pins
Packages
A/D Config. as
10-Bit @
1.1 Msps or
12-Bit @
500 ksps
(1,2)
Timer
16-Bit
Input
Cap
Output
Comp/
Std PWM
Motor
Control
PWM
QEI
UART
w/
IrDA
®
SPI
I
2
C™
ECAN™
Technology
Codec
Interface
PPS
CodeGuard™
Security
NOTE 1: dsPIC33F devices with 2 A/D converters can achieve 2.2 Msps conversion rate.
2: Each A/D configured as 10-bit has 4 S/H. Each A/D configured as 12-bit has 1 S/H.
*Contact Microchip Technology for availability date.
Abbreviations are found on the last page of the Selector Guide.