Product Info

Revision 0.2 (02/2020)

Preliminary

From the FCC Grant:

Output Power listed is conducted.

This device must be professionallyinstalled.

This grant is valid only when the device is sold to OEM integrators and installation is done under the

control of the Grantee. This transmitter is restricted for use with the specific antenna(s) tested in this

application for Certification and must not be co-located or operating in conjunction with any other antenna

or transmitters within a host device, except in accordance with FCC multi-transmitter product

procedures. The antenna of this transmitter must be installed to provide a separation distance of at least

20cm from all persons.

2.1.3 Approved Antenna Types

To maintain modular approval in the United States, only the antenna types that have been tested shall be

used.

Antennas approved for A09-3167 with the antenna types are listed in Table 1-1.

Antenna Requirement :47CFR section 15.203

Caution: This equipment must be professionally installed. The installer shall be responsible for ensuring

that only the supplied antenna is employed so that the limits in this part are not exceeded. Non-

professional installation or installation of the equipment with an improper antenna may void the equipment

authorization from the FCC and will void the Microchip warranty.

2.1.4 Helpful Websites

Federal Communications Commission (FCC): http://www.fcc.gov

FCC Office of Engineering and Technology (OET) Laboratory Division Knowledge Database (KDB):

https://apps.fcc.gov/oetcf/kdb/index.cfm