Product Info

Revision 0.2 (02/2020)
Preliminary
2
This equipment (ATSAMR34 Xplained Pro Evaluation Kit/ A09-3167) is an evaluation kit and not a
finished product. It is not directly marketed or sold to general public through retail; it is only sold
through authorized distributors or through Microchip.
Using it requires a significant engineering expertise towards understanding of the tools and
relevant technology which can be expected only from a person who is Professionally trained in
the technology.
The following regulatory notices are to cover the requirements under the regulatory approval.
1.1 Antenna Considerations:
Table 1-1 provides the list of Approved antennas along with the manufacturer and part number
details.
Slno. P/N Vendor Antenna Gain @
915 M
Hz Band
Antenna type
1 AL-A80355-UB701 Alead Technology 2 dBi Dipole
2 RFA-ZW-C55-B70-D034 Alead Technology 2 dBi Dipole
1.2 A09-9137 Usage Instructions under Limited Modular Approval
The Evaluation kit when used in USA and Canada, will only work on the 902-928 MHz Frequency band,
with hopping activated if the 125kHz channels are enabled.
The Host product manufacturer must ensure that the RF behavior adheres to the certification (e.g. FCC,
ISED) requirements when the module is installed in the final Host product.