Datasheet

25AA512
DS22021F-page 8  2010 Microchip Technology Inc.
Read Sequence
The device is selected by pulling CS low. The 8-bit
READ instruction is transmitted to the 25AA512 fol-
lowed by the 16-bit address. After the correct READ
instruction and address are sent, the data stored in the
memory at the selected address is shifted out on the
SO pin. The data stored in the memory at the next
address can be read sequentially by continuing to
provide clock pulses. The internal Address Pointer is
automatically incremented to the next higher address
after each byte of data is shifted out. When the highest
address is reached (FFFFh), the address counter rolls
over to address 0000h allowing the read cycle to be
continued indefinitely. The READ instruction is
terminated by raising the CS
pin (Figure 2-1).
FIGURE 2-1: READ SEQUENCE
SO
SI
SCK
CS
0 234567891011 21222324252627282930311
0100000115 14 13 12 210
76543210
Instruction 16-bit Address
Data Out
High-Impedance