Data Sheet
24AA128/24LC128/24FC128
DS20001191U-page 4 2010-2021 Microchip Technology Inc.
and its subsidiaries
TABLE 1-2: AC CHARACTERISTICS
AC CHARACTERISTICS
Industrial (I): VCC = +1.7V to 5.5V TA = -40°C to +85°C
Extended (E): VCC = +2.5V to 5.5V TA = -40°C to +125°C
Param.
No.
Symbol Characteristic Minimum Maximum Units Conditions
1F
CLK Clock Frequency
100 kHz 1.7V VCC 2.5V
400 kHz 2.5V VCC 5.5V
400 kHz 1.7V VCC 2.5V (24FC128)
1000 kHz 2.5V VCC 5.5V (24FC128)
2THIGH Clock High Time
4000 ns1.7V VCC 2.5V
600 ns2.5V VCC 5.5V
600 ns1.7V VCC 2.5V (24FC128)
500 ns2.5V VCC 5.5V (24FC128)
3TLOW Clock Low Time
4700 ns1.7V VCC 2.5V
1300 ns2.5V VCC 5.5V
1300 ns1.7V VCC 2.5V (24FC128)
500 ns2.5V VCC 5.5V (24FC128)
4TR SDA and SCL Rise Time
1000 ns 1.7V VCC 2.5V (Note 1)
300 ns 2.5V VCC 5.5V (Note 1)
300 ns
1.7V VCC 5.5V (24FC128)
(Note 1)
5TF SDA and SCL Fall Time
300 ns All except, 24FC128 (Note 1)
100 ns
1.7V VCC 5.5V (24FC128)
(Note 1)
6THD:STA Start Condition Hold Time
4000 ns1.7V VCC 2.5V
600 ns2.5V VCC 5.5V
600 ns1.7V VCC 2.5V (24FC128)
250 ns2.5V VCC 5.5V (24FC128)
7TSU:STA Start Condition Setup Time
4700 ns1.7V VCC 2.5V
600 ns2.5V VCC 5.5V
600 ns1.7V VCC 2.5V (24FC128)
250 ns2.5V VCC 5.5V (24FC128)
8THD:DAT Data Input Hold Time 0ns Note 2
9TSU:DAT Data Input Setup Time
250 ns1.7V VCC 2.5V
100 ns2.5V VCC 5.5V
100 ns1.7V VCC 5.5V (24FC128)
10 TSU:STO Stop Condition Setup Time
4000 ns1.7V VCC 2.5V
600 ns2.5V VCC 5.5V
600 ns1.7V VCC 2.5V (24FC128)
250 ns2.5V VCC 5.5V (24FC128)
Note 1: Not 100% tested. CB = total capacitance of one bus line in pF.
2: As a transmitter, the device must provide an internal minimum delay time to bridge the undefined region
(minimum 300 ns) of the falling edge of SCL to avoid unintended generation of Start or Stop conditions.
3: The combined TSP and VHYS specifications are due to new Schmitt Trigger inputs, which provide improved
noise spike suppression. This eliminates the need for a TI specification for standard operation.
4: This parameter is not tested but ensured by characterization.