Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsIntegrated Circuits (ICs)SOT 23 6 1 kBit 128 x 8

24AA014/24LC014

DS21809G-page 2  2010 Microchip Technology Inc.

1.0 ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings

(†)

VCC.............................................................................................................................................................................6.5V

All inputs and outputs w.r.t. V

SS ......................................................................................................... -0.6V to VCC +1.0V

Storage temperature ...............................................................................................................................-65°C to +150°C

Ambient temperature with power applied................................................................................................-40°C to +125°C

ESD protection on all pins  4 kV

TABLE 1-1: DC SPECIFICATIONS

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

DC CHARACTERISTICS

Industrial (I): TA = -40°C to +85°C, VCC = +1.7V to +5.5V

Automotive (E): T

A = -40°C to +125°C, VCC = +2.5V to +5.5V

Param.

No.

Symbol Characteristic Min. Typ. Max. Units Conditions

— A0, A1, A2, SCL, SDA

and WP pins

—————

D1 VIH High-level input voltage 0.7 VCC ——V—

D2 VIL Low-level input voltage — — 0.3 VCC V0.2 VCC for VCC < 2.5V

D3 V

HYS Hysteresis of Schmitt

Trigger inputs

0.05 VCC ——V(Note)

D4 V

OL Low-level output voltage — — 0.40 V IOL = 3.0 mA, VCC = 2.5V

D5 I

LI Input leakage current — — ±1 AVIN = VSS or VCC

D6 ILO Output leakage current — — ±1 AVOUT = VSS or VCC

D7 CIN,

OUT

Pin capacitance

(all inputs/outputs)

——10pFVCC = 5.5V (Note)

A = 25°C, FCLK = 1 MHz

D8 ICC write Operating current — 0.1 3 mA VCC = 5.5V, SCL = 400 kHz

D9 ICC read — 0.05 1 mA —

D10 I

CCS Standby current —

—

0.01

—

A

Industrial

Automotive

SDA = SCL = V

A0, A1, A2, WP = VSS

Note: This parameter is periodically sampled and not 100% tested.