Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsIntegrated Circuits (ICs)SOIC 8 1 kBit 128 x 8

24AA014H/24LC014H

1.0 ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings

(†)

VCC.............................................................................................................................................................................6.5V

All inputs and outputs w.r.t. V

SS ......................................................................................................... -0.6V to VCC +1.0V

Storage temperature ...............................................................................................................................-65°C to +150°C

Ambient temperature with power applied................................................................................................-40°C to +125°C

ESD protection on all pins ......................................................................................................................................................≥ 4 kV

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

TABLE 1-1: DC CHARACTERISTICS

All parameters apply across the

specified operating ranges unless

otherwise noted.

Electrical Characteristics:

Industrial (I): VCC = +1.7V to 5.5V TA = -40°C to +85°C

Automotive (E): V

CC = +2.5V to 5.5V TA = -40°C to +125°C

Parameter Symbol Min. Max. Units Conditions

SCL and SDA pins:

High-level input voltage V

IH 0.7 VCC —V

Low-level input voltage VIL — 0.3 VCC V

Hysteresis of Schmitt Trigger inputs VHYS 0.05 VCC —V(Note 1)

Low-level output voltage V

OL —0.40VIOL = 3.0 mA, VCC = 4.5V

OL = 2.1 mA, VCC = 2.5V

Input leakage current ILI —±1μΑ VIN = VSS or VCC, WP = Vss

Output leakage current I

LO —±1μAVOUT = VSS or VCC

Pin capacitance (all inputs/outputs) CIN, COUT —10pFVCC = 5.0V (Note 1)

A = 25°C, f = 1 MHz

Operating current I

CC Read — 400 μAVCC = 5.5V, SCL = 400 kHz

ICC Write — 3 mA VCC = 5.5V

Standby current ICCS —1μAVCC = 5.5V, SDA = SCL = VCC

WP = V

SS, A0, A1, A2 = VSS

Note 1: This parameter is periodically sampled and not 100% tested.