Getting Started Guide

EdVenture 6 – Sumo wrestle
Bring on the robot wars!
This barcode activates Edison’s Sumo wrestle program. The program brings together
bounce in borders to stay with in the ring and obstacle detection to hunt and find the
opponent.
Reading the barcode
1. Place Edison facing the barcode on the right side
2. Press the record (round) button 3 times
3. Edison will drive forward and scan the barcode
What to do
Create your own sumo wrestle ring using black
electrical tape on a white surface. The ring
should be around 40cm/16in in diameter.
Place two Edisons inside the ring and press
play on both at the same time.
Each Edison is now slowly driving forward,
staying inside the ring and ‘looking’ for the
opponent. If the opponent is detected Edison
charges forward at full speed until the edge of
the ring is detected. He then reverse back
victorious and continues to look for another
opponent.
Battles don’t always go to plan, as there are so many variables, such as the angle of the
opponent, the proximity of the edge of the ring or just plain bad luck.
Barcode – Sumo wrestle