Specifications

Gaps or Overlap in Ink Coverage

There are 2 possible causes:

1. If the gaps or overlaps are widely spaced, you may be printing in Draft Mode. Change Mode

to Text & Graphics or Photo. See page 11 for details.

2. The printheads need to be realigned. Please refer to page 14 for details.

Disc Loading error

3. If a disc is not loaded correctly, an error message will be displayed on your PC. Check to see

if there are any discs on the belt. Remove any discs that are left on the belt.

4. Lift the cover and check for any discs on the front deck of the PF-Pro Disc Printer. Remove

any discs found on the belts. Close the cover.

5. Next, reload the input bin and click the OK button on the error message to continue. The

system will load the next disc and continue printing the remaining discs for that job.