DVD Premium Pro LightScribe Series Stand-Alone, NET, and Rackmount Users Manual www.microboards.com Version 1.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC 2
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC TABLE OF CONTENTS Microboards Statement Regarding Improper Duplication ............................................................... 4 System Overview............................................................................................................................. 5 Unpacking your system ................................................................................................................... 5 Installation Requirements .
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Microboards Statement Regarding Improper Duplication Microboards Technology fully supports the right of any business, organization, group, or individual to protect their property from unlicensed, unauthorized, or illegal duplication. As a user of our equipment, we expect you to support that right as well. Microboards Technology is neither responsible nor liable for the infringement of any laws regarding the illegal duplication of property.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC System Overview DVD Premium Pro LightScribe Stand-Alone and Rackmount Series The DVD Premium Pro LightScribe Series includes the Tower and the Rackmount styles. The Tower employs up to 10 General Purpose DVD-+R/DL LightScribe recorders, while the Rackmount employs up to 4 recorders. The hard drive comes standard with the Pro system and allows for DVD/CD image archival and CD track extraction for CD audio compilations.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Installation Requirements System Setup • • • Connect the power cable to the DVD Premium Pro Series tower and plug in to a protected power outlet strip or UPS power supply. NET Series Only: Connect the 2 towers using the NET cable provided (see page 7 for more information).
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Connecting Master and Slave Towers The Microboards DVD Premium Pro NET tower line requires a physical connection between the towers. A tower will be designated as a Master or as a Slave tower initially based solely on the configuration of the connection. The directions below give 2 connection scenarios: a 2-tower configuration, and a Multi-Tower configuration. Please use the appropriate instructions based on the number of towers you have.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Microboards NET Configuration The Microboards NET configuration allows you to connect multiple 10-drive tower duplicators. They can function together as a single duplicator with 10 drives per tower for ultra high-quantity production, or can operate independently as stand-alone duplicators, each copying from a different master.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Advanced Configuration If, however, you wish to operate them as two 3-tower Master/Slave groups, simply press the YES button on the tower on which the Configuration Options display reads NET SLAVE 3. This will cause all towers following this tower to be slaved to that tower. The YES button on the first tower must also be pressed to slave towers 2 and 3 to the first tower.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Main Menu The Arrow buttons (▼▲)allow you to move forward or backward in the menu without selecting the current menu item. The NO button will move you to the next menu item. YES will select the current menu item.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Copy Disc to Disc 1. Place the Master Disc into the Reader drive. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same media type as the master; you cannot copy a CD master to DVD’s, for instance. 2. The display reads COPY START? (DISC to DISC). Copy Start? 3. Press YES.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC 7. You will see this screen after the contents of the master LIGHTSCRIBE? have been analyzed: DATA? Press the NO button to register your master as a disc image. 8. Next, name the disc image: If you do not have the Auto Generate in the Setup menu NAME? feature turned on, use the ▲or ▼buttons to change the (_ character in the position shown by the cursor. Press the YES button to move the cursor to the right or NO to move back to the left.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC 7. You will see this screen after the contents of the master LIGHTSCRIBE? YES have been analyzed: DATA? NO Press the YES button to add a LightScribe print image. 8. You can have up to 20 print images on your disc. Use the ▲or ▼buttons to select the image you want and press YES. You can only select 1 image at a time. 9. The display will now show the progress of the print REGISTER image being transferred to the hard drive: LS 25% 10.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC 9. Press YES and the Reader drive will eject and you can insert another master to register to the HDD. 10. Press NO and to exit this menu without registering data to the hard drive partition. Simulation Disc to Disc Important: Simulation is not allowed when using DVD+R/RW media. 1. At the COPY START? (DISC to DISC) menu, press SIMULATION?? the NO or ▼ button until the display shows (DISC to DISC) SIMULATION? (DISC to DISC). 2.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Track Extraction When extracting tracks to the internal hard drive, the DVD Premium Pro Series will use the next available partition space on the hard drive. Like any time a master is registered to the hard drive, you have the ability to name the partition. 1. At the COPY START? Menu, press the NO or ▼ button until the display reads: Press the YES button. 2. Press YES again in the following screen. Trk EXTRACTION? (CDtoHDD) EXTRACTION OK? 3.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Setup Menu SETUP Yes MODE SELECT? (COPY MODE) Yes COPY? (DISC to DISC) VERIFY? (DISC to DISC) COPY + V? (DISC to DISC) EXIT? COPY? DVD WR SPEED? (MAX) Yes MAX? 12X? 1X? EXIT? MAX? CD WR SPEED? (MAX) Yes MAX? 40X? 4X? EXIT? MAX? ISRC CHECK? (OFF) Yes ISRC ON? ISRC OFF? Auto Run? (OFF) Yes ON? OFF? COPY QUANTITY? (xxxx/xxxx) Yes COPY QUANTITY? 0--- SESSION MODE? (AUTO) Yes AUTO? READER SELECT? (DRIVExx) Yes
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Setup Menu 1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display shows SETUP? (MODE CHANGE). Press the YES button. 2. Pressing the NO or ▼ button will allow you to move from menu to menu. 3. Pressing the YES button will allow you to view or change the configuration of the system. 4. Please follow the flow chart on page 16 to navigate through the different menus.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC LightScribe Template Labeler The LightScribe Template Labeler and LightScribe System Software included with the DSR Premium Pro LightScribe Series duplicator are required for creating the necessary print image files for the LightScribe Print feature to work. Do not update or attempt to use any version of the LightScribe Template Labeler or the LightScribe System other than those provided by Microboards Technology.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Error Codes Read Errors ASC 00 00 00 00 00 00 00 00 01 02 04 04 04 04 04 05 06 08 08 08 08 09 09 09 09 0A 0B 0B 0B 10 11 11 11 11 11 11 12 13 14 14 14 15 15 15 17 17 17 17 17 17 18 18 18 18 1A 1B ASCQ 00 06 11 12 13 14 15 17 00 00 00 01 02 03 07 00 00 00 01 02 03 00 01 02 03 00 00 01 02 00 01 02 05 06 0F 10 00 00 01 05 06 00 01 02 00 01 02 03 04 05 00 01 03 04 00 00 Description NO ADDITIONAL SENSE INFORMATION I/O PROCESS TERMINATED, PLAY OPE
DVD Premium Pro LightScribe Series 1E 20 21 24 25 26 26 26 26 26 28 29 29 29 29 29 2A 2A 2A 2A 2B 2C 2C 2F 30 30 30 30 35 35 35 35 35 39 3A 3A 3A 3B 3B 3B 3B 3B 3B 3B 3D 3E 3E 3E 3F 3F 3F 3F 40 43 44 45 46 47 48 49 4A 4B 00 00 00 00 00 00 01 02 03 04 00 00 01 02 03 04 00 01 02 03 00 00 05 00 00 01 02 03 00 01 02 03 04 00 00 01 02 0F 11 12 13 14 15 16 00 00 01 02 00 01 02 03 NN 00 00 00 00 00 00 00 00 00 MICROBOARDS TECHNOLOGY, LLC RECOVERED ID WITH ECC CORRECTION INVALID COMMAND OPERATION CODE LOGICAL BL
DVD Premium Pro LightScribe Series 4C 4D 4E 53 53 55 57 5A 5A 5B 5B 5B 5B 5D 5D 5D 5E 5E 5E 5E 5E 63 63 64 65 73 80 00 NN 00 00 02 00 00 00 01 00 01 02 03 00 01 FF 00 01 02 03 04 00 01 00 00 00 xx MICROBOARDS TECHNOLOGY, LLC LOGICAL UNIT FAILED SELF-CONFIGURATION TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG) OVAERLAPPED COMMANDS ATTEMPTED MEDIA LOAD OR EJECTED FAILED MEDIUM REMOVAL PREVENTED SYSTEM RESOURCE FAILURE UNABLE TO RECOVER TABLE-OF-CONTENTS OPERATOR REQUEST OR STATE CHANGE INPUT OPERATOR MEDIUM REM
DVD Premium Pro LightScribe Series 0C 0C 0C 0C 0C 0C 11 11 15 15 15 16 16 16 16 16 17 17 17 17 17 17 17 17 17 17 18 18 18 18 18 18 18 18 19 19 19 19 1A 1B 1C 1C 1C 1D 20 21 21 24 25 26 26 26 26 26 27 27 27 27 27 27 27 28 02 03 07 08 09 0A 00 06 00 01 02 00 01 02 03 04 00 01 02 03 04 05 06 07 08 09 00 01 02 03 04 05 06 07 00 01 02 03 00 00 00 01 02 00 00 00 02 00 00 00 01 02 03 04 00 01 02 03 04 05 06 00 MICROBOARDS TECHNOLOGY, LLC WRITE ERROR-RECOVERED WITH AUTO REALLOCATION WRITE ERROR-RECOMMEND REASSIG
DVD Premium Pro LightScribe Series 29 29 29 29 29 2A 2A 2A 2A 2B 2C 28 29 2A 2A 2C 2C 2C 2C 2E 2F 30 30 30 30 30 30 30 31 31 32 32 35 35 35 35 35 37 39 3A 3A 3A 3D 3E 3E 3E 3F 3F 3F 3F 40 43 44 45 46 47 48 49 4A 4B 4C 4D 00 01 02 03 04 00 01 02 03 00 00 00 00 00 01 00 03 04 05 00 00 00 01 02 05 06 08 09 00 01 00 01 00 01 02 03 04 00 00 00 01 02 00 00 01 02 00 01 02 03 NN 00 00 00 00 00 00 00 00 00 00 NN MICROBOARDS TECHNOLOGY, LLC POWER ON, RESET, OR BUS DEVICE RESET OCCURRED POWER ON OCCURRED SCSI BUS R
DVD Premium Pro LightScribe Series 4E 51 51 53 53 55 57 5A 5A 5A 5A 5B 5B 5B 5B 5D 5D 5D 5D 5E 5E 5E 5E 5E 63 64 64 65 72 72 72 72 72 72 73 73 73 73 73 73 73 B6 B9 80 00 00 01 00 02 00 00 00 01 02 03 00 01 02 03 00 01 03 FF 00 01 02 03 04 00 00 01 00 00 01 02 03 04 05 00 01 02 03 04 05 06 00 00 FF MICROBOARDS TECHNOLOGY, LLC OVAERLAPPED COMMANDS ATTEMPTED ERASE FAILURE ERASE FAILURE - Incomplete erase operation detected MEDIA LOAD OR EJECT FAILED MEDIUM REMOVAL PREVENTED SYSTEM RESOURCE FAILURE UNABLE TO
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Specifications DVD Recorder Drive: Power Source: Weight: Dimensions: Power supply: Environment: DVD-+R/RW/DL CD-R/RW Recorder 115V/230V 50-60Hz switchable power supply 58 pounds 7.48” (W) x 16.75” (D) x 24.
DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC Tower Models (Stand-Alone and NET Series) Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
