Specifications

• Printing Preferences
16
Utility Tab
The Resolution setting should always be set at .1mm
for best results.
Alignment values will move the print image on the
disc.
The Outer and Inner Diameters will change the size of
the area to be printed. To avoid excessive ink buildup,
these values should never be set so that the GX Auto
Printer is printing off the media.
Ink Level
The Ink Levels show how much remains of all 3 colors, Cyan, Magenta and Yellow.
NOTE: If you place a used cartridge in the GX, the ink level may not be reported correctly. If the GX
can identify the cartridge, it may report the correct ink levels; if not, it will assume that the ink cartridge
is new and will show ink levels of 100%.
Before each disc is printed, the ink levels are checked. If the level of any one color is has reached
10%, a warning message will be displayed on your PC and printing will be temporarily suspended.
You can either change the cartridge at this point and click OK, or click OK to continue printing using
the same cartridge.
If you continue with the same cartridge, printing will continue uninterrupted until the ink level reaches
5%. The low ink level warning will be displayed once more. Again, either change the cartridge or
continue.
Once the ink level reaches 3% or less, the warning will be displayed before each print.
It is strongly recommended that you replace the cartridge at this point.