Specifications

• Manual Software Re-Installation
20
Manual Software Re-Installation
The information in this section will only apply to a manual re-installation of the individual software
packages. If you have not yet installed the GX-2 Disc Publisher using the Installer, it is
recommended that you do so. Installing the GX-2 Disc Publisher in an incorrect order could result in
an unsuccessful installation.
Zulu2 Software Re-Installation
There are 3 methods of reinstalling Zulu2 should the need arise:
A. (Recommended) Insert the Microboards GX-2 Disc Publisher Installation CD into the
CD/DVD ROM drive on your computer and select the Repair option when the installer starts.
Click the Prassi Zulu2 button to reinstall Zulu2. Clicking the Install All Applications button
will reinstall Zulu2, SureThing, and the Toolbox.
Follow these steps once the Zulu2 installer launches:
Note in the upper right-hand corner that during an update of Zulu2, the version currently
installed is listed under the version of Zulu2 to be installed.
Select the language to install; the default is
English.
Click Next.
The files will now be copied from the CD to
the operating system.
Once finished, this screen will appear:
When reinstalling over an existing installation
of Zulu2, the Reboot Computer option may
not appear. If the Reboot Computer option
is available, you should reboot after the
installation.
B. Alternately, Open the Applications
directory on the Installation CD and
run Prassi Zulu2 for Microboards
Setup (EFIGS). exe to reinstall Zulu2
manually.
C. The Prassi Zulu2 installer was also
added to your hard drive in the event
that you need to reinstall but do not
have access to the Installation CD.
Run Prassi Zulu2 for Microboards
Setup (EFIGS).exe in the C:\Program
Files\Microboards\GX2 Installer\
Applications directory on your hard
drive.