Specifications

6
System Requirements
The Microboards G3 Auto Printer has the following minimum requirements and compatibilities:
Operating System
Mac OS 10.5 to 10.6.
Processors
Requires Intel Processor.
System Memory
Minimum 1 GB of system memory.
USB Connection
USB 2.0 is recommended. USB 1.1 may be used but is not recommended, as using USB 1.1 may
result in more time being necessary for print images to be passed to the printer.
Assembly and Ink Installation
Assembly Instructions
G3 Auto Printer Assembly
Remove the G3 Auto Printer system
from the shipping box and confirm
you received all of the items.
Place the G3 Auto Printer on a
stable, flat surface. You will need
room both in front and behind the
system, as discs will be accessed
from both locations.
The Input Bin posts are pre-
installed, with the wide post to the
right.
The 50-disc Output Bin is shipped in
place under the front cover. Lift the
cover to remove the packaging tape
from the Output Bin.