Specifications

12
Device Information
Click the Device Information icon to view Model and Firmware Version of your GX Series printer.
Test
To confirm the computer is communicating with the G3 Auto Printer, print a Test Disc. This can be
done with one of the inkjet printable CD’s included with your G3 Auto Printer, or an inkjet compatible
disc you may already have. To print the Test Disc:
• Load at least one piece of printable media in the Input hopper.
• From the Microboards Toolbox, select Test.
• Click the Test button.
• Once printing is complete, the disc will be ejected into the output hopper.
Disc Printing
The Outer and Inner Diameters will change the size of
the area to be printed. To avoid excessive ink buildup,
these values should never be set so that the G3 Auto
Printer is printing off the media.
The Alignment values will move the print image on the
disc in 0.1 mm increments.
The Restore to Factory Settings button will restore the
values to the default values. The Top and Left Side
values will be changed to 0.
Support
Clicking the Support button will open the Microboards Technology Support website in your default
internet browser. This function requires an internet connection.
Supplies
Clicking the Supplies button will open the Microboards Technology website in your default internet
browser. This function requires an internet connection.
Registration
Clicking the Registration button will open your default internet browser to the Microboards Product
Registration webpage. When registering your G3 Auto Printer, please be sure you are including the
correct serial number, which will be on the back of the G3 and on the box product label. This function
requires an internet connection.
Recycling
Clicking the Recycling button will open the Microboards Technology website in your default internet
browser to provide you with information on recycling used ink cartridges. This function requires an
internet connection.