Specifications

The CX-1 Disc Publisher and PrintWrite

Microboards PrintWrite is required to control the Burn and Print functionality of the Microboards CX-1

Disc Publisher. It is able to set up publishing jobs, load the CX-1 , burn to the loaded disc, unload the

disc, and then print the image you have selected.

PrintWrite will automatically find your CX-1 Disc Publisher the robotics and printer when the

application is opened. Having more than one robotic system connected to the Mac is not supported.

Please see the Microboards PrintWrite manual for more information on using PrintWrite.

Print Only without PrintWrite

While PrintWrite does include a Print Only project type, you can print from any application to the CX-1

Disc Publisher. When printing using the CX-1 Disc Publisher from any application, you should always

choose Microboards PF-3 and 120mm disc in the Format For and Paper Size Page Setup

selections, respectively.

It is highly recommended that the image you are printing is 120mm by 120mm. Having a

different size image may result in the improper placement of the image on the disc.

Printing prior to burning any media is not recommended!!