Specifications

MICROBOARDS TECHNOLOGY, LLC CX-1 DISC PUBLISHER
13
Disc Printing
The Outer and Inner Diameters will change the
size of the area to be printed. To avoid
excessive ink buildup, these values should
never be set so that the CX-1 Disc Publisher is
printing off the media.
The Alignment values will move the print
image on the disc in 0.1 mm increments.
The Restore to Factory Settings button will
restore the values to the default values. The
Top and Left Side values will be changed to 0.
Support
Clicking the Support button will open the Microboards Technology Support website in your default
internet browser. This function requires an internet connection.
Supplies
Clicking the Supplies button will open the Microboards Technology website in your default internet
browser. This function requires an internet connection.
Registration
Clicking the Registration button will open your default internet browser to the Microboards Product
Registration webpage. When registering your CX-1 Disc Publisher, please be sure you are including
the correct serial number, which will be on the back of the CX-1 and on the box product label. This
function requires an internet connection.
Recycling
Clicking the Recycling button will open the Microboards Technology website in your default internet
browser to provide you with information on recycling used ink cartridges. This function requires an
internet connection.