Specifications

MICROBOARDS TECHNOLOGY, LLC CX-1 DISC PUBLISHER
21
Software Re-Installation
The information in this section will only apply to a manual re-installation of the individual software
packages. If you have not yet installed the CX-1 Disc Publisher using the Installer, it is recommended
that you do so. Installing the CX-1 Disc Publisher in an incorrect order could result in an
unsuccessful installation.
Toolbox Re-Installation
The Microboards Toolbox will be installed automatically during the initial installation of the CX-1 Disc
Publisher from the Installation CD. The Toolbox installation is hidden at that time, but the successful
installation of the Toolbox can be verified by the presence of the Toolbox icon on your Windows
desktop.
There are 2 methods of reinstalling the Toolbox should the need arise:
A. (Recommended) Load the Installation CD and select the Repair option when the installer
starts.
Click the Microboards CX-1 Printer Toolbox button to reinstall the Toolbox or the Install
Both Applications button to reinstall both SureThing Disc Labeler and the Toolbox.
B. Open the Applications directory on the Installation CD and copy the file Toolbox.exe to the
C:\Program Files\Microboards\CX-1 Installation\Toolbox directory on your PC (if your PC
does not boot off the C: drive, use the correct drive letter instead). The application is stand-
alone and can be placed anywhere on the PC, but it will not automatically launch when
Windows is started unless it is in this directory.
Zulu2 Software Re-Installation
There are 3 methods of reinstalling Zulu2 should the need arise:
A. (Recommended) Insert the Microboards CX-1 Disc Publisher Installation CD into the
CD/DVD ROM drive on your computer and select the Repair option when the installer starts.
Click the Prassi Zulu2 button to reinstall Zulu2. Clicking the Install All Applications button
will reinstall Zulu2, SureThing, and the Toolbox.
Follow these steps once the Zulu2 installer launches:
Note in the upper right-hand corner that during an update of Zulu2, the version currently
installed is listed under the version of Zulu2 to be installed.
Select the language to install; the default is English.
Click Next.
The files will now be copied from the CD to the operating system.
Once finished, this screen will appear:
When reinstalling over an existing installation of Zulu2, the Reboot Computer option may not
appear. If the Reboot Computer option is available, you should reboot after the
installation.
B. Alternately, Open the Applications directory on the Installation CD and run Prassi Zulu2 for
Microboards Setup (EFIGS). exe to reinstall Zulu2 manually.
C. The Prassi Zulu2 installer was also added to your hard drive in the event that you need to
reinstall but do not have access to the Installation CD. Run Prassi Zulu2 for Microboards
Setup (EFIGS).exe in the C:\Program Files\Microboards\GX2 Installer\ Applications
directory on your hard drive.