Specifications

MICROBOARDS TECHNOLOGY, LLC CX-1 DISC PUBLISHER

You will see an entry labeled

“USB Serial Port (COMx)” entry

for each CX-1 Disc Publisher you

have installed. The COMx will

be the COM port number to be

entered into the Configure

screen.

Select the COM Port as found

on the Computer Management

screen.

Next, select the Drive. This

drive will be used as the

recorder.

Finally, select the Printer.

To confirm you have made the correct selections, you

can click on the T box next to each item, as follows:

• When the T is pressed for the COM Port, the

elevator will move up and down.

• When the T is pressed for the recorder, the

tray will open and then close.

• When the T is pressed for the Printer, the

belts will move in reverse.

Checking the Don’t show this window again box will

bypass the configuration step when launching Zulu2

again. You will be able to reset this option should it be

necessary to configure the system again. Go to

Utilities under the Zulu2 Robotics menu to re-enable

the configuration. It is recommended that you leave

this checkbox unchecked.

Click the OK button.

The system will now initialize the CX-1 Disc Publisher. The belts will be cleared of any discs and any

discs in the recorders will be removed and rejected.

Once initialization is complete, the system is ready for use.

Please see the Zulu2 for Microboards Disc Publishers manual for more information on using Zulu2.