User`s manual

10
Specifications:
CD Recorder Drive: 52x CD-RW speed selectable drive
Power Source: 115V/230V 50-60Hz switchable power supply
Power supply: 250W
Environment: Temperature: 40°C (104°F) / 5°C (41°F)
Humidity: 20% - 80%
Supported Formats:
CD-DA , Mixed Mode, ISO9660, Hybrid, CD-ROM Mode1/Mode2, CD-I, CD-ROM XA Form1/form2 , HFS,
UFS,CD-EXTRA (CD-PLUS)
Firmware Update
Occasionally it may be necessary to load new or updated firmware on to the CopyWriter Tower DUPLICATOR.
You will be sent a CD containing the firmware program. Please follow these steps to load the disc.
• Hold down the YES button and turn on power to the system.
• The system will beep once.
• Release the YES button.
• The Reader drive will eject.
• Please the firmware CD into the Reader drive and close the tray.
• The Status lights will blink as the firmware program is being loaded.
• Once the firmware is loaded, the Reader drive will eject the disc.
• Remove the firmware disc from the Reader and close the tray.
• The COPYWRITER TOWER DUPLICATOR will now reboot and be ready for use with the new firmware
program running.
Contact Information
For technical questions or support issues, please contact Microboards Technology technical support at Phone:
952-556-1639, FAX: [phone], by email at
[e-mail] or on the web at
http://www.microboards.com.