CWT Series Users Manual www.microboards.com Version 2.
CWT Series MICROBOARDS TECHNOLOGY, LLC 2
CWT Series MICROBOARDS TECHNOLOGY, LLC TABLE OF CONTENTS System Overview ..................................................................................................5 Unpacking your system.........................................................................................5 Microboards Statement Regarding Improper Duplication .....................................5 Installation Requirements .....................................................................................6 Main Menu ..........
CWT Series MICROBOARDS TECHNOLOGY, LLC 4
CWT Series MICROBOARDS TECHNOLOGY, LLC System Overview The CWT Series employs up to 10 General Purpose CD recorders. An intuitive, menu driven display and 5-button control interface provide one-touch operation for the novice user while providing advanced features for the professional.
CWT Series MICROBOARDS TECHNOLOGY, LLC Installation Requirements System Setup • • Connect the power cable to the CWT Series tower and plug in to a protected power outlet strip or UPS power supply. Turn on power to the tower. The system is now ready to use.
CWT Series MICROBOARDS TECHNOLOGY, LLC Main Menu The Arrow buttons (▼▲) allow you to move forward or backward in the menu without selecting the current menu item. The NO button will move you to the next menu item. YES will select the current menu item.
CWT Series MICROBOARDS TECHNOLOGY, LLC 3. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking. 4. Press YES. 5. The drive trays will open on any recorder without blank discs installed. If you do not want to make a copy in those drives, close the tray(s), wait for the drive light to go out, and then press the YES button to start the copy job. 6.
CWT Series MICROBOARDS TECHNOLOGY, LLC Setup Menu SETUP Yes MODE SELECT? (COPY MODE) Yes COPY? (DISC to DISC) VERIFY? (DISC to DISC) CD WR SPEED? (MAX) Yes MAX? ISRC CHECK? (OFF) Yes ISRC ON? ISRC OFF? Auto Run? (OFF) Yes ON? OFF? COPY QUANTITY? (xxxx/xxxx) Session Mode? (AUTO) Reader Select? (DRIVExx) Yes Yes Yes COPY + V? (DISC to DISC) 48X? 4X? EXIT? EXIT? EXIT? COPY? MAX? ISRC ON? COPY QUANTITY? 0--- AUTO? CLOSE? OPEN? EXIT? AUTO? DRIVE01 READER THE DISPLAY WILL C
CWT Series MICROBOARDS TECHNOLOGY, LLC Setup Menu 1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display shows SETUP? (MODE CHANGE) SETUP? (MODE CHANGE) 2. Press the YES button 3. The first setup option is Mode Select, followed by Write Speeds, ISRC Check, Copy Quantity, Session Mode, Drive Inquiry, Firmware Version and Exit. 4. Pressing the NO or ▼ button will allow you to move from menu to menu. 5.
CWT Series MICROBOARDS TECHNOLOGY, LLC Error Codes Read Errors ASC 00 00 00 00 00 00 00 00 01 02 04 04 04 04 04 05 06 08 08 08 08 09 09 09 09 0A 0B 0B 0B 10 11 11 11 11 11 11 12 13 14 14 14 15 15 15 17 17 17 17 17 17 18 18 18 18 1A 1B 1E ASCQ 00 06 11 12 13 14 15 17 00 00 00 01 02 03 07 00 00 00 01 02 03 00 01 02 03 00 00 01 02 00 01 02 05 06 0F 10 00 00 01 05 06 00 01 02 00 01 02 03 04 05 00 01 03 04 00 00 00 Description NO ADDITIONAL SENSE INFORMATION I/O PROCESS TERMINATED, PLAY OPERATION ABORTED AUD
CWT Series 20 21 24 25 26 26 26 26 26 28 29 29 29 29 29 2A 2A 2A 2A 2B 2C 2C 2F 30 30 30 30 35 35 35 35 35 39 3A 3A 3A 3B 3B 3B 3B 3B 3B 3B 3D 3E 3E 3E 3F 3F 3F 3F 40 43 44 45 46 47 48 49 4A 4B 4C MICROBOARDS TECHNOLOGY, LLC 00 00 00 00 00 01 02 03 04 00 00 01 02 03 04 00 01 02 03 00 00 05 00 00 01 02 03 00 01 02 03 04 00 00 01 02 0F 11 12 13 14 15 16 00 00 01 02 00 01 02 03 NN 00 00 00 00 00 00 00 00 00 00 INVALID COMMAND OPERATION CODE LOGICAL BLOCK ADDRESS OUT OF RANGE INVALID FIELD IN CDB LOGICAL UNIT
CWT Series 4D 4E 53 53 55 57 5A 5A 5B 5B 5B 5B 5D 5D 5D 5E 5E 5E 5E 5E 63 63 64 65 73 80 MICROBOARDS TECHNOLOGY, LLC NN 00 00 02 00 00 00 01 00 01 02 03 00 01 FF 00 01 02 03 04 00 01 00 00 00 xx TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG) OVAERLAPPED COMMANDS ATTEMPTED MEDIA LOAD OR EJECTED FAILED MEDIUM REMOVAL PREVENTED SYSTEM RESOURCE FAILURE UNABLE TO RECOVER TABLE-OF-CONTENTS OPERATOR REQUEST OR STATE CHANGE INPUT OPERATOR MEDIUM REMOVAL REQUEST LOG EXCEPTION THRESHOLD CONDITION MET LOG COUNTER AT MAXI
CWT Series 0C 0C 0C 0C 0C 11 11 15 15 15 16 16 16 16 16 17 17 17 17 17 17 17 17 17 17 18 18 18 18 18 18 18 18 19 19 19 19 1A 1B 1C 1C 1C 1D 20 21 21 24 25 26 26 26 26 26 27 27 27 27 27 27 27 28 29 MICROBOARDS TECHNOLOGY, LLC 03 07 08 09 0A 00 06 00 01 02 00 01 02 03 04 00 01 02 03 04 05 06 07 08 09 00 01 02 03 04 05 06 07 00 01 02 03 00 00 00 01 02 00 00 00 02 00 00 00 01 02 03 04 00 01 02 03 04 05 06 00 00 WRITE ERROR-RECOMMEND REASSIGNMENT WRITE ERROR-RECOVERY NEEDED WRITE ERROR-RECOVERY FAILED WRITE ER
CWT Series 29 29 29 29 2A 2A 2A 2A 2B 2C 28 29 2A 2A 2C 2C 2C 2C 2E 2F 30 30 30 30 30 30 30 31 31 32 32 35 35 35 35 35 37 39 3A 3A 3A 3D 3E 3E 3E 3F 3F 3F 3F 40 43 44 45 46 47 48 49 4A 4B 4C 4D 4E MICROBOARDS TECHNOLOGY, LLC 01 02 03 04 00 01 02 03 00 00 00 00 00 01 00 03 04 05 00 00 00 01 02 05 06 08 09 00 01 00 01 00 01 02 03 04 00 00 00 01 02 00 00 01 02 00 01 02 03 NN 00 00 00 00 00 00 00 00 00 00 NN 00 POWER ON OCCURRED SCSI BUS RESET OCCURRED BUS DEVICE RESET FUNCTION OCCURRED DEVICE INTERNAL RESET
CWT Series 51 51 53 53 55 57 5A 5A 5A 5A 5B 5B 5B 5B 5D 5D 5D 5D 5E 5E 5E 5E 5E 63 64 64 65 72 72 72 72 72 72 73 73 73 73 73 73 73 B6 B9 80 MICROBOARDS TECHNOLOGY, LLC 00 01 00 02 00 00 00 01 02 03 00 01 02 03 00 01 03 FF 00 01 02 03 04 00 00 01 00 00 01 02 03 04 05 00 01 02 03 04 05 06 00 00 FF ERASE FAILURE ERASE FAILURE - Incomplete erase operation detected MEDIA LOAD OR EJECT FAILED MEDIUM REMOVAL PREVENTED SYSTEM RESOURCE FAILURE UNABLE TO RECOVER TABLE-OF-CONTENTS OPERATOR REQUEST OR STATE CHANGE IN
CWT Series MICROBOARDS TECHNOLOGY, LLC Specifications Recorder Drive: Power Source: Weight: Dimensions: Power supply: Environment: CD-R/RW Recorder 115V/230V 50-60Hz switchable power supply 58 pounds 7.48” (W) x 16.75” (D) x 24.
CWT Series MICROBOARDS TECHNOLOGY, LLC Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
