Specifications

DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC

Registering Data to the Hard Drive (HDD)

When registering data to a partition on the internal hard drive, you do have the option

of recording to the blank media as well. In the SETUP menu, go to “Copy DISC to

HD/DISC” and change the setting from OFF to ON. This will allow the data from

the master disc to be copied to the internal hard drive, as well as any blank discs you

have in the recorders. See page 19 for a description of the SETUP menu.

1. At the COPY START? (DISC to DISC) menu, press the NO key until the display

shows MASTER SELECT? (DISC TO DISC)

MASTER SELECT?

(DISC to DISC)

2. Place the Master disc into the Reader drive.

3. Press the Yes key

4. The display will show:

>READER?

(DISC TO DISC)

5. Press the No key

6. The display will now show:

>HDD1?

(DISC TO HDD)

7. If you wish to copy the data to the 1

partition, press the Yes key.

8. If you wish to select another partition, press the NO key.

>HDD2?

(DISC to HDD)

9. By continuing to press the NO key, you will scroll through the different HDD

partitions. Once you are at the partition you wish to use, press the YES key.

10. The display will now show the progress of the data being transferred to the hard

drive:

REGIST 4.0GB

DVD 15%

11. Once the Master disc has been copied to the HDD, the Reader drive will eject the

disc. When you go back into the MASTER SELECT? Menu, and select a

partition with data stored on it, the display will show the type of data (ROM or

Video) and the capacity of that data. Proceed to COPY HDD TO DVD section.