User manual

USER MANUAL

m crob t

RRC-1258 MKII

mickes-reviderade- Ba1258B_RemoteRig_MkIIs-PA5.docx

User manual

Rev. PA8 – 23 Jan 2011

98 of 146

full power when tuning and it’s done relatively fast, small and cheap 10-20W dummyloads can

be used (not included).

Hardware configuration

In the standard RRC:s the strappings are done manually by the customer, but In the RRC-

1258MkIIs Yaesu Twin package the strappings are done by a small pcb marked 1258Y which

is assembled at the strapping area. The small pcb is removable if you later want to use the

RRC:s for some other configuration. When you replace it is important that the notch which

marks pin one is placed according to the picture below.

For your reference the picture below shows how the strappings are done on the small pcb.