User manual

USER MANUAL
m crob t
RRC-1258 MKII
mickes-reviderade- Ba1258B_RemoteRig_MkIIs-PA5.docx
Microbit 2.0 AB 2010. All rights reserved
User manual
Rev. PA8 – 23 Jan 2011
72 of 146
Power supply
Control-RRC:
The Control-RRC is supplied with a common 13,8 V (10-18V) power supply. The display and
speaker amplifier needs a lot of power so you need 1A.
Radio-RRC:
The Radio-RRC should be supplied from the same power supply as the radio to avoid
humming. Please put a small fuse on the cable if you connect it to a 30 Amp PS.