User manual

USER MANUAL

m crob t

RRC-1258 MKII

mickes-reviderade- Ba1258B_RemoteRig_MkIIs-PA5.docx

User manual

Rev. PA8 – 23 Jan 2011

53 of 146

I/O = The output follows Input 1 from the Radio-RRC.

Keyer = The output act as a local output to for the keyer to key a local

radio. ( default is I/O)

OUT2 mode

Output 2 can be configured for one of two functions.

I/O = The output follows Input 2 from the Radio-RRC.

Keyer = The output act as a local output to for the keyer to key a local

radio. ( default is I/O)

USB RTS as PTT

Select if the USB virtual COM port RTS signal is used as external PTT.

0 = No (default)

1 = Yes

USB DTR as CW

Select if the USB virtual COM port DTR signal is used as straight key

output.

0 = No (default)

1 = Yes