User manual

USER MANUAL

m crob t

RRC-1258 MKII

mickes-reviderade- Ba1258B_RemoteRig_MkIIs-PA5.docx

User manual

Rev. PA8 – 23 Jan 2011

52 of 146

IO Settings

The inputs and outputs in both the Control-RRC and Radio-RRC are configurable to meet

different needs.

Control-RRC:

Parameter

Setting

IN0 mode

Select the function for Input-0 (IN0) signal in the I/O connector.

0 = I/O, input status is transferred to Radio-RRC (default)

1 = Keyer, straight key or external keyer

2 = PTT, PTT-switch or foot-switch etc.

OUT0 mode

Output 0 can be configured for one of two functions.

I/O = Indicating that SIP connection is up.

Keyer = The output act as a local output to for the keyer to key a local

radio. ( default is I/O)

OUT1 mode

OUT1 mode Output 1 can be configured for one of two functions.