User manual

USER MANUAL
m crob t
RRC-1258 MKII
mickes-reviderade- Ba1258B_RemoteRig_MkIIs-PA5.docx
Microbit 2.0 AB 2010. All rights reserved
User manual
Rev. PA8 – 23 Jan 2011
48 of 146
Dynamic DNS setting (only Radio-RRC)
The Radio-RRC has a DynDNS client to be used when the Internet Service Provider (ISP) uses
dynamic IP addresses instead of fixed IP address. The DynDNS client checks what IP address
your router has got from the ISP and sends the information to DynDNS:s DNS server. When
using DynDNS you enter "Own host name" instead of an IP address in the SIP contact setting
in the Control-RRC and you don't need to bother if the IP address at the Radio-RRC changes.
You need to register an account (free of charge) at
http://www.dyndns.com/services/dns/dyndns/ and get a domain name. There are other
providers of the same service but RRC-1258MkII only supports DynDNS.