User manual

USER MANUAL
m crob t
RRC-1258 MKII
mickes-reviderade- Ba1258B_RemoteRig_MkIIs-PA5.docx
Microbit 2.0 AB 2010. All rights reserved
User manual
Rev. PA8 – 23 Jan 2011
46 of 146
Advanced settings
Under advanced settings it is possible to change the default port numbers used by the RRC. It
can be necessary if there are more than one RRC on your LAN or if you are using SIP based IP
telephony (using port 5060). You really need to know what you are doing when you change
port numbers especially on the Radio-RRC so that you don't disconnect yourself. Change web
and telnet port number ONLY if you have to due to other services or more than one RRC on
your LAN. If you lose the connection a car ride might be the next thing you do.
Parameter
Setting
UDP cmd port
Port number used for the Command channel.
12000 (default)
UDP audio port
Port number used for the audio channel
11000 (default)
SIP port
Port number used for the SIP session.
5060 (default)