User manual

USER MANUAL
m crob t
RRC-1258 MKII
mickes-reviderade- Ba1258B_RemoteRig_MkIIs-PA5.docx
Microbit 2.0 AB 2010. All rights reserved
User manual
Rev. PA8 – 23 Jan 2011
19 of 146
Strapping and jumpers
Before connecting the RRC to your radio you need to put some straps in place depending
on your radio. Down below follows instructions of how to disassembly the RRC and
pictures showing where to find the different straps.
1:
Start with removing the screws holding the D-sub on the rear marked COM2. The tool
should be 5 mm (3/16").
2:
Open the box by pressing the D-sub until you can get your fingers behind the edge of
the lid and can slide the housing apart.