User manual

USER MANUAL
m crob t
RRC-1258 MKII
mickes-reviderade- Ba1258B_RemoteRig_MkIIs-PA5.docx
Microbit 2.0 AB 2010. All rights reserved
User manual
Rev. PA8 – 23 Jan 2011
125 of 146
SIP-Connect/disconnect via MIC UP button:
Radio settings (example)
Parameter
Control
Radio
Program mode
4 – Yaesu, Kenwood, Elecraft
4 – Yaesu, Kenwood, Elecraft
SIP password
hello
hello
SIP realm
SIP contact
192.168.0.228
Auto connect
No
Audio quality
2 – Linear 16 bits 8 kHz
2 – Linear 16 bits 8 kHz
Audio Dual-RX
-
Yes/No
Codec out gain
255
255
Codec inp gain
18
0
Codec inp preamp
Yes
Codec inp HPF Hz
163
163
COM0 baudrate
9600
9600
COM0 data bits
8
8
COM0 stop bits
1
1
COM0 parity
0 - Off
0 - Off
(*) Available only in RRC-1258MkIIs, remember that the bandwidth demand is doubled.
Connections
Control-RRC:
Connect a standard RS-232 cable between the PC and the RRC COM2.
The microphone can be connected direct to the RRC AUX/MIC connector if you have a
microphone with RJ-45 connector. If you have a microphone with a circular connector you
can buy an adapter cable, MJ-88, from Kenwood or make one by yourself.
The speaker is connected direct to the RRC SP-jack with a 3.5 mm stereo plug.