User manual

USER MANUAL
m crob t
RRC-1258 MKII
Ba1258B_RemoteRig_MkIIs-A33.docx
 Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. A33 – 2015 Jan 28
54 of 236
COM0 Program mode 3
char timeout
The char timeout can be programmed. The default
timeout should be 2 and works for all radios except
FT-1000 in 4800 baud which need it to be set to 60.
2 = default
60 = FT-1000 in 4800 baud
Use USB Com Port as
COM0
COM0 can be connected to the USB interface instead
of the normal serial interface. When installing
Microbit Setup manager a virtual Com port called
“Microbit RRC Virtual Comport (COMX)” is installed.
That’s the one you should connect to when using
HRD or other softwares.
Yes or No (default = No).