User manual

USER MANUAL
m crob t
RRC-1258 MKII
Ba1258B_RemoteRig_MkIIs-A33.docx
 Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. A33 – 2015 Jan 28
205 of 236
1
Connect 12V power supply to the PWR jack
2
Connecter Ethernet to the Ethernet jack ( 2m CAT 5 cable included)
3
Connect the CAT cable E2c from the COM2 connector to the K3 CAT connector
4
Connect the mic cable E2a from the AUX/MIC jack to the K3 mic connector.
5
Connect the audio cable from to the SP jack to the K3 speaker out on the back
output.
6
Connect the keying cable from the PAD jack to the K3 key input (Adapter from ¼”
connector to 3.55 mm included)
7
Connect the K3 remote power on cable E3c from I/O jack to the K3 ACC connector.