User manual

USER MANUAL
m crob t
RRC-1258 MKII
Ba1258B_RemoteRig_MkIIs-A33.docx
 Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. A33 – 2015 Jan 28
149 of 236
 Connect the mic cable Y6a from the Radio-RRC AUX/MIC connector to the radios
microphone jack.
 Connect the speaker signal from the radios headset output jack or similar to the Radio-
RRC SP jack with the standard 3.5 mm – 3.5 mm cable with stereo plugs in both ends. If
the radio have a ¼” jack use the supplied adapter ¼”” to 3.5mm.
 Connect keyer cable (standard 3.5 mm – 3.5 mm cable with stereo plugs in both ends)
from the Radio-RRC PAD jack to the straight key input jack on the Radio. If the radio have
a ¼” jack, use the supplied 3.5 mm to ¼” adapter.
 Connect the CAT 5 cable from the Ethernet jack to your switch or router
 Connect the 12V power supply to the DC jack