User manual

USER MANUAL
m crob t
AS-1289
Ba-AS1289-PA1 (reparerad)
 Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. PA1 – 2014 feb 17
6 of 46
problem but you need to use a dynamic DNS service. You can use Remoterigs free
dynamic DNS service or a DynDNS account. New DynDNS account are no longer free.
For detailed information about Dynamic DNS services see the Dynamic DNS chapters
under Configuration with WEB-Interface.
14. Configure the units Dynamic DNS settings (see chapter Dynamic DNS Setting).
15. Now it’s time to configure your remote router. We recommend that you first enable the
remote configuring of your router, you may need it later. After that’s done configure
port forwarding (see chapter Network and Firewalls). When this is done your remote
control unit should be reachable over the Internet.
16. When back at the Control QTH try to browse to the Dynamic DNS address “Own host
name” you registered and entered into the remote control unit. You should get in
contact with the Antenna Switch internal web server exactly as it was local, remember
to use :port number after the dynamic dns address if you have changed the webserver
port from 80 for example http://sm2oan.dnsalias.com:8000.
Enjoy the remote controlling.