User manual
USER MANUAL
m crob t
AS-1289
Ba-AS1289-PA1 (reparerad)
Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. PA1 – 2014 feb 17
38 of 46
Antenna selection
At the antenna selection page you can decide which antenna you want to use at different
frequencies. First select which antennas you want to be automatically selected on the bottom
line. Then you can enter the frequency ranges in the boxes to the left, ant mark which
antenna port you want to be active for each range.
If you want the antennas to be deselected eg. grounded, after a while when the radio is
switched off and the switch get no answers on the frequency requests, you can set a
“Disconnect timeout.