User manual

USER MANUAL
m crob t
AS-1289
Ba-AS1289-PA1 (reparerad)
 Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. PA1 – 2014 feb 17
31 of 46
Remoterig dynamic dns service
The Remoterig dynamic dns service only support equipment from Remoterig and Microbit like
this Antenna switches, the RC-1216H, the RRC-1258 and the WebSwitch 1216H etc.
The Remoterig dynamic dns service do not need any registration it’s automatically generated
based on the serial number on the equipment.
To activate the Remoterig dynamic dns client select “ddns.webswitch.se” from the drop down
on the Dynamic DNS settings page. Also select a DNS check interval, if your IP address
change often you can select a low value, if it goes month between the changes you can select
a higher value. After that click on “Submit” and “Apply changes”, the AS-1289 will restart.
After the switch has restarted go back to the Dynamic DNS settings page. You will now see
that the settings Own hostname, Username and Password are automatically generated. The
only important information is the Own host name, copy the whole row, this is the information
you should put into your web browsers address field when you contact the unit in the future.
Store it as a Bookmark as it is difficult to remember. No more registration is needed.
Remember that DNS address like this is only for use when you connect over the internet, as
long as you are operating on you own LAN use the IP address.