User manual

USER MANUAL
m crob t
AS-1289
Ba-AS1289-PA1 (reparerad)
 Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. PA1 – 2014 feb 17
23 of 46
IP Settings
The IP Settings menu is used to setup the initial IP parameters needed for the unit to connect
to the IP network. Down below the settings are described more in details. The Antenna switch
are default configured for a DCHP. It will then ask the router for a IP-address. It’s handy to
use DHCP when installing but it is recommended that you change the settings to DHCP = off
and setup a fixed IP.