User manual

USER MANUAL
m crob t
AS-1289
Ba-AS1289-PA1 (reparerad)
 Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. PA1 – 2014 feb 17
17 of 46
In another network, this is the result of the ipconfig command.
Your PC IP address in this example is 192.168.128.10 this means that the IP of the AS-1289
must have IP:s in the area 192.168.128.2 to 192.168.128.255.
The Netmask is 255.255.128.0 this the Netmask in the RC should be the same
The Default gateway is 192.168.128.1 the Gateway in the AS-1289 should be the same
In this case you must change the IP:s of the Antenna Switch.
Use the Microbit Setup Manager to change the IP settings.
Select the Setup tab click on the “Get Setup” button and enter the IP addresses in the Setup
info dialog box.