User manual

USER MANUAL
m crob t
AS-1289
Ba-AS1289-PA1 (reparerad)
 Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. PA1 – 2014 feb 17
12 of 46
FW update
Click on the "Select file" button and browse to the file with the new firmware, it should be
something like “1216H-CRC_v1.23_2011-10-04.bin” depending on the version and release
date. When you have selected the file click on the "Update" button and the update process
will start, the text in the bottom field will change to "Updating firmware". Attention -- Do not
interrupt the update process in any way!
After about a 1 minute the update is finished and the Antenna Switch will restart. When the
text "Device connected" shows up again in the lower field of the Microbit Setup Manager, you
can change to the "FW/HW" tab and check software version.