Cartridge Machine USER MANUAL FK Irons, XionMini 5-10VDC 3A 2021
INDEX Safety Notice 3 Machine Overview 4 The Grip 5 The Body 6 RCA Connection 7 Connecting Your Machine 8 Adjusting Needle Depth 9 Additional Information 10 Troubleshooting 11
USER MANUAL SAFETY NOTICE CLASS III SYMBOL A Class III appliance is designed to be powered by a separated/safety extra-low voltage (SELV) power source. The voltage from a SELV supply is low enough that under normal conditions, a person can safely come into contact with it without risk of electrical shock. The extra safety features built into Class I and Class II appliances are therefore not required. For medical devices, compliance with Class III is not considered sufficient protection.
USER MANUAL MACHINE OVERVIEW RCA connectivity Powerful motor specifically designed to meet the demands of Micropigmentation THE XION MINI Adjustable needle depth system Changing Permanent Makeup Forever T he first compact pen style machine providing artists full control of parameters that Ergonomic grip design for Micropigmentation unleash their creative vision. Compatible with most power supplies on the market, the Xion Mini is the solution for all your Micropigmentation (MP) needs.
USER MANUAL THE GRIP Xion Mini Grip Autoclavable Ergonomic Grip design Compatible with most membrane needle cartridges on the market THE GRIP T he Xion Mini offers artists 16mm. Other grip options may safe with: steam sterilization, an ergonomic grip design be available. The Grip is crafted cold sanitation solutions, and a never-before-seen full from a solid rod of 6061 T6 and autoclave. machine control. The standard aircraft-grade aluminum.
USER MANUAL THE BODY Xion Mini Body Xion Mini Body THE BODY T he Body is the core of the machine that houses all its components. Constructed from a solid rod of 6061 T6 aircraftgrade aluminum, this module should be sanitized by wiping it with cold sterilization solutions only. Caution: Do not introduce any types of liquid inside the system or autoclave.
USER MANUAL RCA CONNECTION RCA Connector CONNECTION T his connecting terminal is compatible with RCA Cords. RCA Air cord For consistent connection and machine longevity, use the Darklab RCA AIR cord.
USER MANUAL CONNECTING YOUR MACHINE 1 Plug the RCA cord into the Xion Mini RCA connector HOW TO CONNECT YOUR MACHINE Best connection Improper connection Insert the RCA cord into the Only use RCA Air cord RCA connector atop the Xion provided with the machine and Mini and connect to a Power sold by any of our companies. Supply.
USER MANUAL ADJUSTING NEEDLE DEPTH ADJUSTING NEEDLE DEPTH T o adjust needle depth, hold the machine body and MotorBolt while turning the Grip. A counterclockwise turn decreases depth, while a clockwise turn increases depth (also known as needle hang). Each time you turn the grip it allows you to set your needle precisely without involuntarily turning while tattooing.
USER MANUAL ADDITIONAL INFORMATION VOLTAGE PARAMETERS While voltage is a parameter that will vary from artist to artist, this machine has been tested to operate at a minimum voltage of around 5 Volts and a maximum voltage of 10 Volts. Depending on the type of needle configuration or brand you use, feel free to adjust the voltage to obtain your desired performance. Warning: Exceeding the operating voltage or 10 Volts can damage your machine, cause adverse operating conditions and void your warranty.
USER MANUAL TROUBLE SHOOTING HANDY TIPS The following tips will help you get the most out of your Xion Mini and avoid potential issues: • Always secure your machine. Dropping the machine can cause damage to the magnets, bearings and motor brushes. • Use only cartridges with membranes to avoid contamination. • Do not exceed 10 Volts. • Always use power supplies with at least 1Amp of current supply. • Rinse your needle frequently to avoid pigment drying up and slowing down your cartridges.
