Take Control of Your PMU USER MANUAL FK Irons, Flux Max S 2023
INDEX Safety Notice 3 Intro 4 Overview 5 Features 6 Detaching the PowerBolt II 7 Connecting your Device 8 Adjusting Needle Depth 9 Additional Information & Troubleshooting 10
USER MANUAL SAFETY NOTICE CLASS III SYMBOL A Class III appliance is designed to be supplied from a separate/safety extra-low voltage (SELV) power source. The voltage from a SELV supply is low enough that, under normal conditions, a person can safely come into contact, without the risk of electrical shock. The extra safety features built into Class I and Class II appliances are, therefore, not required.
USER MANUAL FLUX S MAX INTRO Flux S Max Take control of your PMU with our most versatile device yet. Longer strokes, better control, and easier accessibility.
USER MANUAL OVERVIEW USB-C Port Display Screen Control Buttons Dynamic Power Path Management USB-C Li-ion Battery Compact Battery Housing 9-Watt brushless motor Ratcheted, adjustable needle depth system Redesigned, ergonomic grip wrap for maximum, functional comfort Bluetooth Enabled: Pair with Darklab app 36.5mm SPECIFICATIONS • Output Voltage: 4-12V • Increment/decrement voltage interval: 0.5 or 0.1V* • Maximum output current: 1A • Charger Input: USB-C • Size: H 126.5mm x W 36.5mm 126.
USER MANUAL FEATURES THE POWERBOLT II Main Power Display (Hertz or Volts) Bluetooth Indicator Up Button Battery charge Indicator Center Button Down Button OLED Display Secondary Power Display (Hertz or Volts) eGive Level Timer Battery Charge: 4 bars = 100%, 3 bars = 75%, 2 bars = 50% and 1 bar = 25%. Single bar will blink to indicate when there is aproximately 5 minutes left of operation. Note: Screen will switch to sleep mode after 15 seconds when device not in use.
USER MANUAL DETACHING THE POWERBOLT II Ensure you have a firm grip on the body and grip of the device. Twist the PowerBolt II as shown and remove. Flux S Max shown in demostration image. DETACHING THE POWERBOLT II The PowerBolt II is compatible Turn the PowerBolt II counter- to ensure power electric leads with the Flux S Max, Flux Max, clockwise and pull out. To align correctly. Avoid contact Flux, Flux S and the EXO.
USER MANUAL CONNECTING YOUR DEVICE 1 Plug the USB-C cord into the PowerBolt II connector. HOW TO CHARGE YOUR DEVICE Best connection Improper connection Insert the provided USB-C cable to operate while plugged in. into the back of the PowerBolt The USB-C connection is II and connect to a Hover or intended only for charging your use wall adapter to connect to PowerBolt II. PowerBolt II can power socket.
USER MANUAL ADJUSTING NEEDLE DEPTH Increases needle depth Decreases needle depth ADJUSTING NEEDLE DEPTH To adjust needle depth, hold the device body and PowerBolt II while turning the Grip. A counter clockwise turn decreases depth, while a clockwise turn increases depth (also known as needle hang). Each time you turn the grip you can feel the tactile feedback of the ratcheting mechanism. Each “click” displaces your needle 0.
USER MANUAL ADDITIONAL INFORMATION VOLTAGE/HERTZ PARAMETERS While voltage/hertz is a parameter that will vary from artist to artist, the PowerBolt II has been tested to operate at a minimum voltage of 4 Volts/66 Hertz to a maximum voltage of 12 Volts/199 Hertz. Depending on the type of needle configuration, or brand you use, feel free to adjust the voltage or hertz to obtain the desired performance. WARRANTY Microbeau warrants that the device will perform effectively when used as intended.
