User Manual

10
USER MANUAL
VOLTAGE/HERTZ PARAMETERS
While voltage/hertz is a parameter that will vary from artist to artist, the PowerBolt II has been tested
to operate at a minimum voltage of 4 Volts/66 Hertz to a maximum voltage of 12 Volts/199 Hertz.
Depending on the type of needle conguration, or brand you use, feel free to adjust the voltage or
hertz to obtain the desired performance.
WARRANTY
Microbeau warrants that the device will perform effectively when used as intended. Should this product
prove to be defective due to manufacturing issues, Microbeau will repair/replace the device free of
charge. This warranty will be void if the device shows signs of having been tampered, disassembled,
handled roughly, dropped, overexposed to moisture or damage resulting in compromised functionality.
HANDY TIPS
The following tips will help you get the most out of your PowerBolt II and avoid potential issues:
• Do not exceed the suggested voltage
• Use only FDA-approved cold sterilization solutions for disinfection
• DO NOT AUTOCLAVE
ADDITIONAL INFORMATION
TROUBLESHOOTING
1.- Device Manufacturer
FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126
2.- Servicing Your Device
As for any mechanical device, Microbeau strongly suggests that you service your device once a
year to ensure all working parts are working as expected. This ensures the optimal condition of
all working parts, including internal device clean up and fresh lubrication. Routine servicing will
ensure that your device remains functioning as intended. Service is subject to fees.
3.- Warning
Disconnect device from any power source before making any adjustments.
For service inquiries, please contact [e-mail].
For additional tips and tutorials, please visit Microbeau.com