Cartridge Machine USER MANUAL FK Irons, BellarV2 4-9.5VDC .
INDEX Safety Notice 3 Machine Overview 4 The Grip 5 The Body 6 RCA Connection 7 Connecting your Machine 8 Adjusting Needle Depth 9 Additional Information 10 Troubleshooting 11
USER MANUAL SAFETY NOTICE CLASS III SYMBOL A Class III appliance is designed to be powered by a separated/safety extra-low voltage (SELV) power source. The voltage from a SELV supply is low enough that under normal conditions, a person can safely come into contact with it without risk of electrical shock. The extra safety features built into Class I and Class II appliances are therefore not required. For medical devices, compliance with Class III is not considered sufficient protection.
USER MANUAL RCA connectivity MACHINE OVERVIEW Powerful 6W MotorBolt system specifically designed to meet the demands of Micropigmentation “Click” grip adjustment THE BELLAR V2 The Perfect PMU Trifecta: Precision, Power & Comfort he first pen style machine T Ergonomic grip design for Micropigmentation providing artists full control of parameters that unleash their creative vision.
USER MANUAL THE GRIP Bellar V2 Grip Autoclavable Ergonomic Grip design Compatible with most membrane needle cartridges on the market THE GRIP T he Bellar V2 offers artists 16mm. Other grip options may steam sterilization safe, cold an ergonomic grip design be available. The Grip is crafted sanitation solutions safe and and never-before-seen full from a solid rod of 6061 T6 autoclave safe. machine control. The standard aircraft-grade aluminum.
USER MANUAL THE BODY Bellar V2 Body “Click” grip adjustment Bellar V2 Body Stabilizing Friction O-Rings THE BODY T he Body is the core of the machine that houses all the machine components. Constructed from a solid rod of 6061 T6 aircraft- grade aluminum, this module should be sanitized by wiping it with cold sterilization solutions only. Caution: Do not introduce any types of liquid inside the system Body isometric view or autoclave.
USER MANUAL RCA CONNECTION AIR Mini DC Connector CONNECTION T his connecting terminal is compatible with the Darklab AIR Mini DC Cord Air DC Cord. For consistent connection and machine longevity, use the enclosed AIR Mini DC cord.
USER MANUAL CONNECTING YOUR MACHINE 1 Plug the RCA cord into the Bellar V2 RCA connector HOW TO CONNECT YOUR MACHINE Best connection Improper connection Insert the AIR Mini DC cord Only use AIR Mini DC cord (4mm x 10.5mm) into the back provided with the machine and of the MotorBolt and connect sold by any of our companies. to a Power Supply. The RCA (Microbeau, DarkLab, FK connector jack is concealed Irons) by the MotorBolt housing.
USER MANUAL ADJUSTING NEEDLE DEPTH ADJUSTING NEEDLE DEPTH T o adjust needle depth, hold the machine body and MotorBolt while turning the Grip. A counterclockwise turn decreases depth, while a clockwise turn increases depth (also known as needle hang).
USER MANUAL ADDITIONAL INFORMATION VOLTAGE PARAMETERS While voltage is a parameter that will vary from artist to artist, this machine has been tested to operate at a minimum voltage of around 4 Volts with a maximum voltage of 9.5 Volts. Depending on the type of needle configuration or brand you use, feel free to adjust the voltage to obtain the desired performance. Note: Exceeding 9.5 Volts is not recommended. ACCEPTED NEEDLES Use cartridge needles with internal membrane.
USER MANUAL ADDITIONAL INFORMATION HANDY TIPS The following tips will help you get the most out of your Bellar V2 and avoid potential issues: • Always secure your machine. Dropping the machine can cause damage to the magnets, bearings and motor brushes. • Use only cartridges with membranes to avoid contamination. • Do not exceed the suggested voltage. • Always use power supplies with at least 1Amp of current supply.
