User`s manual

High Performance Low Cost Embedded Systems
4.2.2 Mounting a SD Card
Plug a SD card in the SD interface of the board you will be able to see a SD device “Storage
Card” is created in the “resource manager”. Double click on the SD card icon, you will be able to
browse its contents, read and write files.
4.2.3 Connecting a USB Device via ActiveSync
Note: Please use the “\windows platform tools\CE ActiveSync USB driver” to install a USB
driver.
After successfully installing the driver and the ActiveSync application, connect the MINI2440
board to a host PC, if everything goes smoothly, you will see the screen shot below:
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 99 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]