User`s manual

High Performance Low Cost Embedded Systems
4.2 Testing Hardware in WinCE
4.2.1 Mounting a USB Drive
Using a USB drive in WinCE is similar to Linux. After entering WinCE, plug a USB drive in the
USB host port, the power led on the USB drive will be flashing, several seconds later this drive will
be mounted on the system. Double click on the “My computer” icon, open the “resource manager”,
you will observe that a USB device has been created. Please refer to the screen shot below:
Double click on the USB drive icon, you will be able to browse its contents, read and write files.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 98 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]