User`s manual

High Performance Low Cost Embedded Systems
4.1.3 Configuring Web Server
If the HTTP service is set to auto-run in WinCE, it will be started on startup. This service is what
is commonly called “web server”. Connect the MINI2440 board which runs WinCE to a host PC,
type the board’s IP address in IE’s address bar, if you see a preset home page as the example shown
below, it indicates the web server has been started.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 97 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]