User`s manual

High Performance Low Cost Embedded Systems
3.2.4 File Transfers to and from a PC via a Serial Port
After login into the MINI2440 system via a serial port, you can transfer files to and from a host
PC by using command “rz”or “sz” as follows:
(1) Transfering files by using “sz”
Open a super teminal, click on the mouse’s right button, then click on “Receive files” to set up
the destination directory and the protocol this transfer will use, see the screenshot below:
Type “sz /shanghaitan.mp3” in the shell to transfer the “shanghaitan.mp3” file under the “/”
directory to the host PC. It took a while to transfer this big file. After it is done, the system will save
it in the directory you set in the previous step. Please see the screen-shot below:
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 93 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]