User`s manual

High Performance Low Cost Embedded Systems
will take a picture which will be saved in the “Documents”. This utility has provides functions to
adjust brightness, contrast and gamma value. When you start this utility, it will read the camera preset
parameters.
Note: although the system already has drivers for USB cameras, each camera might have different
output format. Since we cannot collect all cameras this utility would only work for some common
cameras, if your camera doesn’t work with our system please email us at
[e-mail] .
3.1.19 Using CMOS Camera
This utility can only work with the CMOS camera CAM130. Before power on, please connect
your camera to the “CAMERA” interface on the board, and then click on the “CMOS Camera” icon
in the “FriendlyARM” subgroup.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 72 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]