User`s manual

High Performance Low Cost Embedded Systems
Click on “Disconnect” to disconnect the connection. Click on “Setting…” to enter the parameter
setting interface which lists some basic serial port parameters:
Comm Port: you can choose “/dev/ttySAC0,1,2” or the USB to Serial “/dev/ttyUSB0,1,2,3”
Speed: bits per second
Data: data bits, 8 or 7, usually 8.
Hex: input and output data in Hex format
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 69 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]