User`s manual

High Performance Low Cost Embedded Systems
the “All On” button will turn on all the LEDs, and clicking on the “All Off” will turn off all the LEDs.
Checking any LED box will turn on that LED, and unchecking will turn it off. Close the LED Testing
interface the led-player service will be restarted.
3.1.14 Testing EEPROM
In the “FriendlyARM” subgroup, click on the “I2C-EEPROM” icon to open the interface below:
From top to bottom there are a “Write Data” button, Write area, “Read Data” button and read area.
Click on the soft keyboard icon in the task bar, write some characters in the write area, click on the
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 65 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]