User`s manual

High Performance Low Cost Embedded Systems
3.1.11 Testing Ping
Please connect your board to a network, set up the network parameters such as gateway, DNS and
so on. Then you can use our graphic interface to test network connection. In the “FriendlyARM”
subgroup, click on the “Ping” utility:
After you setup your DNS, your system will be able to recognize both character domain names and
IP addresses. By default, ping will try four times. But if you check the “ping forever” option, it will
ping forever.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 62 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]